Planning the layout of streets and the need for the production of goods

In planning the layout of the plant and transfer of materials needed some land or floor area requirements for factory production activities to be established, as well as other supporting facilities. Thus the need to count how much land is prepared, especially for the production. Floor area calculation is based on raw materials to be prepared, machinery or equipment used, and finished goods are produced. Based on this, it will get a floor area receiving the stack and rack models, a floor area of ​​fabrication and assembling, and shipping of floor area.

In calculating the floor area requirements, the issues involved are related to other activities that will affect the land or floor area, namely:

   1. Conveyance
   2. Way of transporting
   3. Way of storage of raw materials (stacked)
   4. Material flow

All of which must be taken into account in determining the floor area by increasing the allowance. Purpose of calculating the floor area is to estimate the production needs of the floor area that includes :


    * Receiving (raw materials warehouse stacks and rack models)
    * Fabrication and Assembling (machinery and equipment)
    * Shipping (finished goods warehouse)

Usefulness of the floor area is: is used in calculating the cost of Material Handling (OMH) between departments, according to floor area calculations.
Receiving

Warehouse floor area of ​​the raw material is composed of stacks and shelf models. To give an idea of ​​how the storage of raw materials in the warehouse, then it needs to be described is how the storage material (both models stack and rack models), so that the floor area used in accordance with the results of the calculation. The picture was made to give an explanation of:

    * Height includes how many stacks
    * The width includes how many stacks
    * Length includes how many stacks

So that if added together, the material is illustrated in accordance with the material at a period to be stored. Similarly to the model of the shelf, the required floor area of ​​land required is based on the needs of the calculation results after storage in a rack in accordance with the height and maximum width of shelf and storage method on the shelf.
Fabrication and Assembling

Floor area of ​​the machine (fabrication and assembling) also need to be taken into account in planning the layout of the plant and removal of material. The data required in the calculation of floor area, these include the: name of the machine, the number of engines, and engine size. This data can be obtained from the MPPC
Shipping

The data required in calculating the floor area of ​​finished goods warehouse include: number of components, component name, and type of finished goods