The correct sequence of procedures for use of fire extinguishers

Fire extinguishers can be divided into 4 types:
1. Dry Chemical Powder
2. CO2 gas
3. foam
4. Hallon

To find out the types of fire extinguishers can be seen on the side of the tube is usually no information can be used for the classification of fires of any kind, there are four kinds of fire classification
• Classification A: That kind of fire on synthetic materials such as fabric, wood, rubber, plastics, etc.
• Classification B: That is the type of fire on the example of oil Gasoline, diesel, etc.
• Classification C: That is the type of electrical fire
• Classification D: That kind of fire in a metal



The correct sequence of procedures for use of fire extinguishers the following picture:

1. open the lock that is at the grip, make sure that the lock has been freed. sure in a state of calm and not panic during the blackout.

2. Press firmly to grasp the contents of / foam that is inside the extinguisher out.

3. Take the distance and angle that is ideal for putting out fires, ensure a safe distance and a fire should wear clothing that standard and non-flammable. function to protect themselves from the dangers of fire snatched.

4. Point the spray tip or pipe / fire extinguisher into the source of the fire, and slowly sweep to the right and left.

way is a simple way in a fire in our place, put out the fire just as important as maintaining our own personal safety, make sure that when we put out the fire,
- We did not panic and stay calm
- Wear clothes that are a standard remedy fire safety
- Wearing a glass helmet
- Wear gloves
- Boots are standard
- Make sure you are not alone in putting out the fire,
- Be looking for help if you can not cope alone fire